Custom Sensors CCD8000 Servisní příručka stáhnout pdf (Strana 34)

Safety Instructions and Warranty Terms 31

Manual econ sens+ Version 1.40

Modbus Pulses / s (S0/RS 485-Variante) submenu

The settings for the Modbus communication is carried out in this section.

Modbus Settings

The setup has to be performed via HTML.

Parameter

Description

Modbus Interface

This selects which modbus protocol is used:

- none

- Modbus TCP

- Modbus RTU (over RS485 line)

- Modbus Gateway

Modbus address

This single byte value selects the bus address.

Allowed values are 0..255.

Modbus baudrate

This selects the RS485 baudrate. Allowed values are 9600, 19200, 38400,

57600 and 115200.

Modbus paritiy

This selects the RS485 parity: none, odd, even.

Modbus stopbits

Stopbits: 1 or 2.

Modbus port number

This selects the port number for modbus over TCP/IP.

The default value is 502. Other values are allowed

Modbus TCP delay

This parameter is only used when the sesn+ is used as a modbus

gateway. This is a time in milliseconds, allowed values are 0..3600000.

Modbus RS 485 timeout

This parameter is only used when the sens+ is used as a modbus

gateway. This is a time in milliseconds, allowed values are 0..3600000.

Modbus Events Flag

minimum activity time (ms)

minimum activity time for modbus event flags, can be set via HTML

modbus settings. This is a time in milliseconds, allowed values are

0..3600000.

Figure 31: Custom Modbus settings in the menu pulse / s (Example: Modbus TCP)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 48 49

Žádné komentáře

Custom Sensors CCD8000 Servisní příručka Strana 34